14 years of focus on welding and cutting R&D manufacturer, professional manufacturin🌼g welding and cutting e♉quipment production base
Laser cutting robots use high-𓃲density laser beams to focus on processed materials and rapidly heat them. Cooperate with auxiliary gas to blow away the molten metal, and perform relative linear movement between the laser beam and the workpiece to form cutting. It is a new type of cutting equipment mainly used for cutting metal materials. It has fast speed, small cutting seams, small heat affected zone, and high quality and positioning accuracy.
Model | M-20iB/25 | |||||
institution | A multi jointed robot | |||||
Controlled Axes | 6-axis(J1、J2、J3、J4、J5、J6) | |||||
Reachable radius | 1853mm | |||||
Installation method (Note 1) | Ground installation, inverted suspension installation, and oblique cutting installation | |||||
Action range (Note 2) (maximum speed) | j1 | 340°/360°(option)(205°/S) | j2 | 240°/S(205°/S) | j3 | 303°/S(260°/S) |
Maximum wrist movement speed | 4000mm/s | |||||
Maximum wrist load | 25kg | |||||
Maximum load on the j3 arm | 12kg | |||||
Wrist allowable load torque | j4 | 51Nm | j5 | 51Nm | j6 | 31Nm |
Wrist allowable load inertia | j4 | 2.2kgm² | j5 | 2.2kgm² | j6 | 1.2kgm² |
Driving method | AC servo motor drive | |||||
Repeatability | ±0.02mm | |||||
Robot Quality (Note 3) | 210kg | |||||
Input power (average power consumption) | 3kva(1kw) | |||||
Installation conditions |
Environmental temperature:0~450℃ Environmental humidity: usually below 75% RH (without condensation), short-term below 95% RH (within one month) Vibration acceleration: 4.9m/s ² Below 0.5G |
|||||
Note 1: If inclined installation is used, the range of motion of the robot's j1 and j2 axes will be limited. Note 2: During short distance movement, the maximum nominal speed of each axis may not be achieved. Note 3: Mass without robot controller. |
Wechat QR Code
© Copyright 2020 Zhongli Technology All Rights Reseꩲrved
Website by